ATEN Control System - 8-button Keypad (US, 1 Gang)

Kompletní specifikace

The VK108US is a fully-customizable 8-button keypad designed for use with the ATEN Control System. The keypad provides an interface to control devices in a room from a standard wall mounted faceplate. Created with flexibility in mind, the one-gang keypad can be laid out in 14 different combinations of 4 to 8 buttons that snap together as easy as Lego’s. By connecting to the VK2100/VK1100 Control Box over a LAN, users will find it’s effortless using VK6000 software to configure the desired control of any connected device from the keypad. With the button’s ready to go, you have instant and smart control of the facilities from a keypad or keypads that can manage any device in the room. The VK108US is an affordable solution, perfect to serve as the primary interface in small meeting rooms, or as secondary device control in classrooms and conference centers.

Interfaces
Ethernet • 1 x RJ-45 Female, 10/100Base-T
• Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS
• DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Keypad Layout 4~8 buttons customizable in 14 keypad layouts
Switches
Controller ID 1 x 16-segment Switch
Keypad ID 1 x 8-segment Switch
Reset Button 1 x Semi-recessed Pushbutton
Power Consumption DC5V:1.25W:6BTU
DC48V:1.58W:7BTU
Environmental
Operating Temperature 0 – 50°C
Storage Temperature –20 – 60°C
Humidity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Plastic
Weight 0.13 kg ( 0.29 lb )
Dimensions (L x W x H) 11.63 x 7.06 x 3.89 cm
(4.58 x 2.78 x 1.53 in.)
Faceplate Dimensions (L x W x H) 11.92 x 7.42 x 0.92 cm
(4.69 x 2.92 x 0.36 in.)
Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

Key pad - provides physical connection to the ATEN Control System
Fully customizable with 14 layout combinations of 4 to 8 buttons
Available in black or white color
System LED indicators for quick connection status check
Dual-color button LEDs for clear indication and visibility in dark environments
Easy ID pairing with Control Box for Ethernet communication
Up to 8 keypads connect to a single Control Box for future scalability
Unrestricted modes support flexible behavior settings for each button
Intuitive web GUI for easy keypad configuration
Dual power supply – DC 5V or Power over Ethernet
Customized button engraving service

Note: This model is also available in black color – Part number: VK108US1, which is a built-to-order product. To place an order, please contact your regional ATEN representative.

Keypad Layout Example

Custom button placement on the keypad can be set in 14 different combinations of 4 to 8 buttons. The example above shows the 10 most commonly used.

Package Contents
1x VK108US Keypad
1x Button Pack
1x Terminal Block
1x Faceplate
1x User Instructions

Zboží zařazeno v kategoriích