Elektronika
Kancelářská technika
Drogerie a zdraví
Doplňky stravy a pražená káva
Skartovací stroje, hotelové a restaurační vybavení
- Načítám…
Novinky
04.12.2023
Nové produkty v kancelářské technice
V našem e-shopu nyní naleznete nové produkty v kategoriích Kancelářské potřeby a spotřební materiál. Aktovky, bloky, boxy, dávkovače, desky a moho dal...
číst celé
21.04.2020
Dáme zboží od SDZP družstvo
Vítejte na e-shopu Dáme zboží, který je provozován sociálním podnikem SDZP družstvo. Potřebujete vybavit kanceláře elektronikou? Sháníte pracovní oděv...
číst celé
Nepropásněte novinky, akce a slevy!
Můžete se kdykoli odhlásit. Zasíláme jednou za 14 dní.
- Úvod
- Elektronika
- Druhy
- ERGOTRON LX Pro Monitor Arm Expansion Kit rameno vč. kitu, černá
ERGOTRON LX Pro Monitor Arm Expansion Kit rameno vč. kitu, černá
- Kompletní specifikace
- Hodnocení 0
- Komentáře 0
- ERGOTRON LX Pro Monitor Arm Expansion Kit rameno vč. kitu, černáNení skladem4 172 Kč3 448 Kč bez DPH
Kompletní specifikace
ERGOTRON LX Pro Monitor Arm Expansion Kit rameno vč. kitu, černá
Upgrade your LX Pro by adding another monitor arm. Create a multi-monitor solution for two, three or even four monitors. This expansion kit easily attaches directly to the LX Pro pole or its Dual Side-by-Side Collar accessory to accommodate an extra display.
note: For triple or quadruple monitor set-ups, your configuration should incorporate the LX Pro Large Base. LX Pro components are not compatible with the legacy LX or other product lines.
Part Number: 98-734-292
Product Weight: 2.2 kg
Shipping Weight: 3.2 kg
Shipping Dimensions: 16.3" x 13.8" x 6.5" (41.5 x 35 x 16.5 cm)
Description: LX Pro Monitor Arm, Extension and Collar Expansion Kit
Includes arm, extension, monitor pivot, pole collar, attachment hardware
A tension-level indicator provides a visual reference when counterbalancing an arm with its device; when installing multiple arms, note the first arm’s setting for quicker adjustment
To install arms alongside each other, use this kit with the LX Pro Dual Side-by-Side Collar accessory, which is compatible with all LX Pro desk and wall mount bases
To stack arms one above the other, a tall pole is necessary, making the LX Pro Large Base required. Triple or quadruple monitor configurations require stacking while also incorporating one or two Dual Side-by-Side Collar accessories
Can be configured to hold a laptop instead of a display; also order the accessory Laptop Tray (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Aluminum construction offers greater durability and enhanced aesthetics
† LCD screen size is approximate. This size may be exceeded if display does not surpass weight capacity
* Weight Capacity: 4 to 22 lbs (1.8 to 10 kg). Display depth greater than 3.6" (9 cm) may affect weight capacity
‡ Tilt Range: 70° backward, 15° forward
§ Overall side-to-side panning motion is 360°, with 3 turning points at base/extension (360°), extension/arm (360°), and arm/pivot (180°). Motion at the base/extension point can be restricted to 180° by engaging the built-in rotation stop
Extension Range: ? 25" (64 cm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
LX Pro components are not compatible with the legacy LX or other product lines
Upgrade your LX Pro by adding another monitor arm. Create a multi-monitor solution for two, three or even four monitors. This expansion kit easily attaches directly to the LX Pro pole or its Dual Side-by-Side Collar accessory to accommodate an extra display.
note: For triple or quadruple monitor set-ups, your configuration should incorporate the LX Pro Large Base. LX Pro components are not compatible with the legacy LX or other product lines.
Part Number: 98-734-292
Product Weight: 2.2 kg
Shipping Weight: 3.2 kg
Shipping Dimensions: 16.3" x 13.8" x 6.5" (41.5 x 35 x 16.5 cm)
Description: LX Pro Monitor Arm, Extension and Collar Expansion Kit
Includes arm, extension, monitor pivot, pole collar, attachment hardware
A tension-level indicator provides a visual reference when counterbalancing an arm with its device; when installing multiple arms, note the first arm’s setting for quicker adjustment
To install arms alongside each other, use this kit with the LX Pro Dual Side-by-Side Collar accessory, which is compatible with all LX Pro desk and wall mount bases
To stack arms one above the other, a tall pole is necessary, making the LX Pro Large Base required. Triple or quadruple monitor configurations require stacking while also incorporating one or two Dual Side-by-Side Collar accessories
Can be configured to hold a laptop instead of a display; also order the accessory Laptop Tray (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Aluminum construction offers greater durability and enhanced aesthetics
† LCD screen size is approximate. This size may be exceeded if display does not surpass weight capacity
* Weight Capacity: 4 to 22 lbs (1.8 to 10 kg). Display depth greater than 3.6" (9 cm) may affect weight capacity
‡ Tilt Range: 70° backward, 15° forward
§ Overall side-to-side panning motion is 360°, with 3 turning points at base/extension (360°), extension/arm (360°), and arm/pivot (180°). Motion at the base/extension point can be restricted to 180° by engaging the built-in rotation stop
Extension Range: ? 25" (64 cm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
LX Pro components are not compatible with the legacy LX or other product lines
Zboží zařazeno v kategoriích
