Novinky
04.12.2023
Nové produkty v kancelářské technice
V našem e-shopu nyní naleznete nové produkty v kategoriích Kancelářské potřeby a spotřební materiál. Aktovky, bloky, boxy, dávkovače, desky a moho dal...
číst celé
21.04.2020
Dáme zboží od SDZP družstvo
Vítejte na e-shopu Dáme zboží, který je provozován sociálním podnikem SDZP družstvo. Potřebujete vybavit kanceláře elektronikou? Sháníte pracovní oděv...
číst celé
Nepropásněte novinky, akce a slevy!
Můžete se kdykoli odhlásit. Zasíláme jednou za 14 dní.
- Úvod
- Elektronika
- Komponenty PC/Notebooky
- Pevné disky
- Disky SSD
- TRANSCEND SSD420I 512GB Industrial SSD disk2.5" SATA3, MLC, Ind., Iron case, černý
TRANSCEND SSD420I 512GB Industrial SSD disk2.5" SATA3, MLC, Ind., Iron case, černý
- Kompletní specifikace
- Hodnocení 0
- Komentáře 0
TRANSCEND SSD420I 512GB Industrial SSD disk2.5" SATA3, MLC, Ind., Iron case, černýNení skladem8 146 Kč6 732 Kč bez DPH
Kompletní specifikace
TRANSCEND SSD420I 512GB Industrial SSD disk2.5" SATA3, MLC, Ind., Iron case, černý
Featuring a SATA III 6Gb/s interface and a powerful controller, Transcend’s SSD420I is an ideal high-speed, lightweight, and shockproof replacement for traditional rotating hard drives. The SSD420I has a wide operating temperature, allowing sustained functionality and reliability in extreme temperatures.
Features:
Advanced Global Wear-Leveling and Block management for reliability
Advanced Garbage Collection
DDR3 DRAM Cache embedded
Built-in ECC (Error Correction Code) functionality
Power Shield embedded to prevent data loss in the event of sudden power outage
DEVSLP mode
Enhanced S.M.A.R.T. function
RoHS compliant
Shock resistance
Slim, elegant and lightweight design
Specifications:
Interface (connector): SATA III 6Gb/s
Form Factor: 2.5"
Flash Type: MLC
Capacity (GB): 512GB
Max. Performance (Vary by density):
- Read: 560MB/s
- Write: 460MB/s
Op. Voltage(V): 5V±5%
Power Consumption (W): 3.46W (Active), 0.3W (Idle)
Operating Temperature: -40 C~85 C
Storage Temperature: -40 C~85 C
Humidity(%): 0%~95%
Shock(G): 1500G, 0.5ms
Vibration(Hz/G): 5.0G (Peak-to-Peak), 5Hz to 800Hz (Frequency)
Dimensions(mm): 99.8mm × 69.8mm × 7.0mm (3.93" x 2.75" x 0.28")
Weight: Max 95g
MTBF(hours): 1,500,000 hours
Featuring a SATA III 6Gb/s interface and a powerful controller, Transcend’s SSD420I is an ideal high-speed, lightweight, and shockproof replacement for traditional rotating hard drives. The SSD420I has a wide operating temperature, allowing sustained functionality and reliability in extreme temperatures.
Features:
Advanced Global Wear-Leveling and Block management for reliability
Advanced Garbage Collection
DDR3 DRAM Cache embedded
Built-in ECC (Error Correction Code) functionality
Power Shield embedded to prevent data loss in the event of sudden power outage
DEVSLP mode
Enhanced S.M.A.R.T. function
RoHS compliant
Shock resistance
Slim, elegant and lightweight design
Specifications:
Interface (connector): SATA III 6Gb/s
Form Factor: 2.5"
Flash Type: MLC
Capacity (GB): 512GB
Max. Performance (Vary by density):
- Read: 560MB/s
- Write: 460MB/s
Op. Voltage(V): 5V±5%
Power Consumption (W): 3.46W (Active), 0.3W (Idle)
Operating Temperature: -40 C~85 C
Storage Temperature: -40 C~85 C
Humidity(%): 0%~95%
Shock(G): 1500G, 0.5ms
Vibration(Hz/G): 5.0G (Peak-to-Peak), 5Hz to 800Hz (Frequency)
Dimensions(mm): 99.8mm × 69.8mm × 7.0mm (3.93" x 2.75" x 0.28")
Weight: Max 95g
MTBF(hours): 1,500,000 hours
Zboží zařazeno v kategoriích

