APC Stojanová PDU 2G, měření/přepínání, 0U, IEC 309 16A 2P+E -> (21) C13 & (3) C19

Kompletní specifikace

Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 20A/208V, 16A/230V, (21) C13 & (3) C19
Typ připojení vstupu IEC 309 16A 2P+E, délka 3 metry

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering.
Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets.
Power sequencing delays allow users to define the order in which to power up or down attached equipment.
Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding.
Current metering provides real-time remote monitoring of connected loads.
Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles.
User-defined alarms warn of potential circuit overloads before critical IT failures occur.
Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Zahrnuje: Koncovka portu CAN, Instalační příručka, Skříňové instalační konzole, Bezpečnostní příručka, Sériový kabel pro konfiguraci

Zboží zařazeno v kategoriích